WARNING: This is the _old_ Lustre wiki, and it is in the process of being retired. The information found here is all likely to be out of date. Please search the new wiki for more up to date information.

Handling File System Errors

From Obsolete Lustre Wiki
Revision as of 18:57, 2 February 2010 by Docadmin (talk | contribs)
Jump to navigationJump to search

From time to time, usually due to catastrophic disk / RAID failures, it may be necessary to repair the backing file system of an OST or MDT to correct file system errors. This is done using a special version of the e2fsck tool. It may also be useful to run lfsck in such cases. This is a Lustre™-specific tool that checks the coherency of a running Lustre file system as a whole.

For information on the following topics, see Fsck Support.

  • Obtaining e2fsck support for Lustre
  • Using e2fsck on a backing file system
  • Running e2fsck+lfsck on a corrupted Lustre file system

For more information about lfsck, see Section 27.2: lfsck in the Lustre Operations Manual.