WARNING: This is the _old_ Lustre wiki, and it is in the process of being retired. The information found here is all likely to be out of date. Please search the new wiki for more up to date information.

Configuring InfiniBand Connectivity

From Obsolete Lustre Wiki
Revision as of 14:54, 7 October 2009 by Docadmin (talk | contribs)
Jump to navigationJump to search

The following example shows how to configure LNET as an InfiniBand network:

For the SilverStorm/Infinicon InfiniBand Lustre Network Driver (iiblnd), the network and HCA can be specified by entering:


options lnet networks="o2ib3(ib3)"



The node specified is on o2ib network 3 using HCA ib3.




For information about other LNET options, see Section 31.2.1: LNET Options in the Lustre Operations Manual.

For information about building and configuring Infiniband support for Lustre, see the topic "How to build and configure Infiniband support for Lustre" in Appendix B:Lustre Knowledge Base in the Lustre Operations Manual.









Retrieved from "http://wiki.old.lustre.org/index.php?title=Configuring_InfiniBand_Connectivity&oldid=7928"