WARNING: This is the _old_ Lustre wiki, and it is in the process of being retired. The information found here is all likely to be out of date. Please search the new wiki for more up to date information.

Using Xen with Lustre

From Obsolete Lustre Wiki
Revision as of 16:17, 12 November 2009 by Docadmin (talk | contribs) (Created page with '== Xen Virtualization== With Xen virtualization, a thin software layer known as the Xen hypervisor is inserted between the server's hardware and the operating system. This provid...')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Xen Virtualization

With Xen virtualization, a thin software layer known as the Xen hypervisor is inserted between the server's hardware and the operating system. This provides an abstraction layer that allows each physical server to run one or more "virtual servers", effectively decoupling the operating system and its applications from the underlying physical server.

You can deploy Virtualization in one of two choices: full virtualization or paravirtualization.

Full virtualization provides total abstraction of the underlying physical system and creates a new virtual system in which the guest operating systems can run. No modifications are needed in the guest OS or application (the guest OS or application is not aware of the virtualized environment and runs normally).

Paravirualization requires user modification of the guest operating systems that run on the virtual machines (these guest operating systems are aware that they are running on a virtual machine) and provide near-native performance. You can deploy both paravirtualization and full virtualization across your virtualization infrastructure.

Not including "Xen One-pager" as it is marked ''Sun Proprietary/Confidential: Internal Use Only: Engineering Need-to-Know''

Xen- HOWTO

Installing Xen host

Creating Xen Guest

  • virt-install
virt-install --paravirt --name=$NAME --ram=$MEM --vcpus=$NCPUS --file=$IMAGE --file-size=$IMAGESIZE \
             --nographics \
             --noautoconsole \
             --location=nfs:10.8.0.175:/rhel5/cd \
             --extra-args="ks=nfs:10.8.0.175:/home/parinay/xen-cfg/rhel5.cfg"
  • config image . Example file for RHEL5
# Kickstart file automatically generated by anaconda.

install
nfs --server 10.8.0.175  --dir /rhel5/cd
key --skip
lang en_US.UTF-8
keyboard us
text
network --device eth0 --bootproto dhcp
#rootpw --iscrypted $1$QQO.JRIi$kRVI0ntI.EWCvF9DpdNNp/
rootpw --iscrypted $1$wJCInuZ4$C.J3yKu/.a2Ce6cfo1kpV.
# firewall --enabled --port=22:tcp
firewall --disabled
authconfig --enableshadow --enablemd5
selinux --permissive
timezone --utc America/Los_Angeles
bootloader --location=mbr --driveorder=xvda
# The following is the partition information you requested
# Note that any partitions you deleted are not expressed
# here so unless you clear all partitions first, this is
# not guaranteed to work
clearpart --linux --initlabel --drives=xvda
part /boot --fstype ext3 --size=100 --ondisk=xvda
part /     --fstype ext3 --size=0 --grow --ondisk=xvda
part swap   --size=1000
reboot

%packages --resolvedeps
@core
@base
@development-libs
@system-tools
@legacy-network-server
@legacy-software-development
@admin-tools
@development-tools
audit
kexec-tools
device-mapper-multipath
imake
-sysreport


%post
/usr/sbin/useradd -u 500 lustre
/usr/sbin/useradd -u 501 user1
/usr/sbin/useradd -u 60000 quota_usr
/usr/sbin/useradd -u 60001 quota_2usr
mkdir /data
echo 10.8.0.75:/rhel5/cd /data nfs defaults 0 0" >> /etc/fstab

  • Kickstart image can be accessed with nfs or http from the host

Lustre-pacthed Xen Guest images

  • The .config file must be changed for Xen. Excerpt related Xen are below,
CONFIG_X86_64_XEN=y
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_NETXEN_NIC=m
CONFIG_XEN=y
CONFIG_XEN_INTERFACE_VERSION=0x00030203
#
# XEN
#
CONFIG_XEN_PRIVILEGED_GUEST=y
# CONFIG_XEN_UNPRIVILEGED_GUEST is not set
CONFIG_XEN_PRIVCMD=y
CONFIG_XEN_XENBUS_DEV=y
CONFIG_XEN_BACKEND=y
CONFIG_XEN_BLKDEV_BACKEND=m
CONFIG_XEN_BLKDEV_TAP=m
CONFIG_XEN_NETDEV_BACKEND=m
# CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set
CONFIG_XEN_NETDEV_LOOPBACK=m
CONFIG_XEN_PCIDEV_BACKEND=m
CONFIG_XEN_PCIDEV_BACKEND_VPCI=y
# CONFIG_XEN_PCIDEV_BACKEND_PASS is not set
# CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set
# CONFIG_XEN_PCIDEV_BE_DEBUG is not set
# CONFIG_XEN_TPMDEV_BACKEND is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_XEN_FRAMEBUFFER=y
CONFIG_XEN_KEYBOARD=y
CONFIG_XEN_SCRUB_PAGES=y
# CONFIG_XEN_DISABLE_SERIAL is not set
CONFIG_XEN_SYSFS=y
CONFIG_XEN_COMPAT_030002_AND_LATER=y
# CONFIG_XEN_COMPAT_LATEST_ONLY is not set
CONFIG_XEN_COMPAT_030002=y
CONFIG_HAVE_ARCH_ALLOC_SKB=y
CONFIG_HAVE_ARCH_DEV_ALLOC_SKB=y
CONFIG_HAVE_IRQ_IGNORE_UNHANDLED=y
CONFIG_NO_IDLE_HZ=y
CONFIG_XEN_UTIL=y
CONFIG_XEN_BALLOON=y
CONFIG_XEN_DEVMEM=y
CONFIG_XEN_SKBUFF=y
CONFIG_XEN_REBOOT=y
CONFIG_XEN_SMPBOOT=y
  • Follow the link

Building Lustre from source

  • In initrd make sure xenblk is loaded
  • Once you boot in the guest, you might face problems with network. The xennet may not loaded. Execute
depmod -a
modprobe xnenet
Cross check with lsmod

Debugging/Troubleshooting

  • Mounting Xen disk images
    • Handling Linux based virtual hosts w/o LVM

find out what loop devices are already in use:

 
losetup –a 
losetup /dev/loop1 /data/images/rhel5.img
fdisk -l /dev/loop1
kpartx -a /dev/loop1

As the image file uses the loop0 device, the device files that have been created will have the names /dev/mapper/loop0p1, /dev/mapper/loop0p2 and so on. You can now use these files to mount the file system that the root of the virtualized operating system (OS) is installed on.

Once you have made all of the necessary modifications to this file system, un-mount everything properly by entering the following commands:

umount /mnt 
kpartx -d /dev/loop1 
losetup -d /dev/loop1 
  • Mounting Xen disk images
    • Handling logical volumes in Linux-based virtual hosts
losetup –a 
losetup /dev/loop1 /data/images/rhel5.img
fdisk -l /dev/loop1
kpartx -a /dev/loop1

You will need to make sure that the partition is known by the LVM subsystem as a physical device. Knowing that the partition is a type 8e is not enough; you need to tell the LVM subsystem that it is available as a physical device and that the LVM can use it. Use the following command to do this:

pvscan /dev/loop0p2 

Next, you will be told that an LVM volume group has been found within the physical device, but you have to initialize this volume group manually by using this command:

vgscan

To complete the reconfiguration of the LVM structure, you need to do the same for the logical volumes in the volume group which can be done with this command:

lvscan 

Although you now have access to the logical volumes again, you'll see that all of the logical volumes are inactive. You need to fix this before the logical volumes can be mounted. To do this, change the status of the volume group by using the vgchange command. This command will change the status of all volumes in the volume group vm1vg to active:

vgchange /dev/vm1vg 

The LVM logical volumes are now active and ready to be mounted. For example, if you want to mount the logical volume with the name /dev/lvm1vg/root, you would use the following command:

mount /dev/vm1vg/root /mnt 

At this point you have full access to all of the files in the logical volume. You now can make all of the changes that you need to make.

  • Cloning the disk images
  • Enabling the console logging for guests

In /etc/init.d/xend, change the following lines to yes

XENCONSOLED_LOG_HYPERVISOR=yes
XENCONSOLED_LOG_GUESTS=yes

References

Misc