WARNING: This is the _old_ Lustre wiki, and it is in the process of being retired. The information found here is all likely to be out of date. Please search the new wiki for more up to date information.

Difference between revisions of "E1000 Driver Tuning"

From Obsolete Lustre Wiki
Jump to navigationJump to search
 
(One intermediate revision by the same user not shown)
(No difference)

Latest revision as of 21:38, 23 February 2010

(Updated: Feb 2010)

DISCLAIMER - EXTERNAL CONTRIBUTOR CONTENT

This content was submitted by an external contributor. We provide this information as a resource for the Lustre™ open-source community, but we make no representation as to the accuracy, completeness or reliability of this information.


In some I/O use cases, an e1000 driver can become CPU-bound, which may slow down the remaining nodes and compromise read rates. This issue is likely related to RX overflow errors on the nodes. To improve efficiency, increase the RX ring buffer size (the default value is 256). Use one of these options:

/sbin/ethtool -G ethX rx 4096

OR

e1000 module option 'RxDescriptors=4096'