[edit] WARNING: This is the _old_ Lustre wiki, and it is in the process of being retired. The information found here is all likely to be out of date. Please search the new wiki for more up to date information.

Handling Full OSTs

From Obsolete Lustre Wiki
Jump to: navigation, search

(Updated: Oct 2009)

Contents

Sometimes a Lustreā„¢ file system becomes unbalanced, often due to changed stripe settings. If an OST is full and an attempt is made to write more information to the file system, an error occurs. The procedures below describe how to handle a full OST.

Checking File System Usage

The example below shows an unbalanced file system:

root@LustreClient01 ~]# lfs df -h
UUID                 bytes   Used  Available Use%  Mounted on
lustre-MDT0000_UUID  4.4G   214.5M   3.9G     4%   /mnt/lustre[MDT:0]
lustre-OST0000_UUID  2.0G   751.3M   1.1G    37%   /mnt/lustre[OST:0]
lustre-OST0001_UUID  2.0G   755.3M   1.1G    37%   /mnt/lustre[OST:1]
lustre-OST0002_UUID  2.0G     1.7G 155.1M    86%   /mnt/lustre[OST:2] <-
lustre-OST0003_UUID  2.0G   751.3M   1.1G    37%   /mnt/lustre[OST:3]
lustre-OST0004_UUID  2.0G   747.3M   1.1G    37%   /mnt/lustre[OST:4]
lustre-OST0005_UUID  2.0G   743.3M   1.1G    36%   /mnt/lustre[OST:5]

filesystem summary: 11.8G     5.4G    5.8G    45%  /mnt/lustre

In this case, OST:2 is almost full and when an attempt is made to write additional information to the file system (even with uniform striping over all the OSTs), the write command fails as follows:

[root@LustreClient01 ~]# lfs setstripe /mnt/lustre 4M 0 -1
[root@LustreClient01 ~]# dd if=/dev/zero of=/mnt/lustre/test_3 bs=10M count=100
dd: writing `/mnt/lustre/test_3': No space left on device
98+0 records in
97+0 records out
1017192448 bytes (1.0 GB) copied, 23.2411 seconds, 43.8 MB/s

Taking a Full OST Offline

To enable continued use of the file system, the full OST has to be taken offline or, more specifically, rendered read-only using the lctl command. This is done on the MDS, since the MSD allocates space for writing.

1. Log in to the MDS server:

[root@LustreClient01 ~]# ssh root@192.168.0.10
root@192.168.0.10's password:
Last login: Wed Nov 26 13:35:12 2008 from 192.168.0.6

2. Use the lctl dl command to show the status of all file system components:

[root@mds ~]# lctl dl
  0 UP mgs MGS MGS 9
  1 UP mgc MGC192.168.0.10@tcp e384bb0e-680b-ce25-7bc9-81655dd1e813 5
  2 UP mdt MDS MDS_uuid 3
  3 UP lov lustre-mdtlov lustre-mdtlov_UUID 4
  4 UP mds lustre-MDT0000 lustre-MDT0000_UUID 5
  5 UP osc lustre-OST0000-osc lustre-mdtlov_UUID 5
  6 UP osc lustre-OST0001-osc lustre-mdtlov_UUID 5
  7 UP osc lustre-OST0002-osc lustre-mdtlov_UUID 5
  8 UP osc lustre-OST0003-osc lustre-mdtlov_UUID 5
  9 UP osc lustre-OST0004-osc lustre-mdtlov_UUID 5
 10 UP osc lustre-OST0005-osc lustre-mdtlov_UUID 5

3. Use the lctl deactivate command to take the full OST offline:

[root@mds ~]# lctl --device 7 deactivate

4. Display the status of the file system components:

[root@mds ~]# lctl dl
  0 UP mgs MGS MGS 9
  1 UP mgc MGC192.168.0.10@tcp e384bb0e-680b-ce25-7bc9-81655dd1e813 5
  2 UP mdt MDS MDS_uuid 3
  3 UP lov lustre-mdtlov lustre-mdtlov_UUID 4
  4 UP mds lustre-MDT0000 lustre-MDT0000_UUID 5
  5 UP osc lustre-OST0000-osc lustre-mdtlov_UUID 5
  6 UP osc lustre-OST0001-osc lustre-mdtlov_UUID 5
  7 IN osc lustre-OST0002-osc lustre-mdtlov_UUID 5
  8 UP osc lustre-OST0003-osc lustre-mdtlov_UUID 5
  9 UP osc lustre-OST0004-osc lustre-mdtlov_UUID 5
 10 UP osc lustre-OST0005-osc lustre-mdtlov_UUID 5

The device list shows that OST2 is now inactive. If a new file is now written to the file system, the write will be successful as the stripes are allocated across the remaining active OSTs.

Migrating Data within a File System

As stripes cannot be moved within the file system, data must be migrated manually by copying and renaming the file, removing the original file, and renaming the new file with the original file name.

1. Identify the file(s) to be moved. In the example below, output from the getstripe command indicates that the file test_2 is located entirely on OST2:

[root@LustreClient01 ~]# lfs getstripe /mnt/lustre/test_2
OBDS:
0: lustre-OST0000_UUID ACTIVE
1: lustre-OST0001_UUID ACTIVE
2: lustre-OST0002_UUID ACTIVE
3: lustre-OST0003_UUID ACTIVE
4: lustre-OST0004_UUID ACTIVE
5: lustre-OST0005_UUID ACTIVE
/mnt/lustre/test_2
obdidx      objid     objid     group
     2          8       0x8         0

2. Move the file(s):

[root@LustreClient01 ~]# cp /mnt/lustre/test_2 /mnt/lustre/test_2.tmp
[root@LustreClient01 ~]# rm /mnt/lustre/test_2
rm: remove regular file `/mnt/lustre/test_2'? Y

3. Check the file system balance. The df output in the example below shows a more balanced system compared to the df output in the example in Handling Full OSTs.

[root@LustreClient01 ~]# lfs df -h
UUID                  bytes   Used Available Use% Mounted on
lustre-MDT0000_UUID   4.4G  214.5M      3.9G   4% /mnt/lustre[MDT:0]
lustre-OST0000_UUID   2.0G    1.3G    598.1M  65% /mnt/lustre[OST:0]
lustre-OST0001_UUID   2.0G    1.3G    594.1M  65% /mnt/lustre[OST:1]
lustre-OST0002_UUID   2.0G  913.4M   1000.0M  45% /mnt/lustre[OST:2]
lustre-OST0003_UUID   2.0G    1.3G    602.1M  65% /mnt/lustre[OST:3]
lustre-OST0004_UUID   2.0G    1.3G    606.1M  64% /mnt/lustre[OST:4]
lustre-OST0005_UUID   2.0G    1.3G    610.1M  64% /mnt/lustre[OST:5]

filesystem summary:  11.8G    7.3G      3.9G  61% /mnt/lustre

4. Change the name of the file back to the original filename so it can be found by clients.

[root@LustreClient01 ~]# mv test2.tmp test2
[root@LustreClient01 ~]# ls /mnt/lustre
test1 test_2 test3 test_3 test4 test_4 test_x

5. Reactivate the OST from the MDS for further writes:

[root@mds ~]# lctl --device 7 activate

[root@mds ~]# lctl dl
  0 UP mgs MGS MGS 9
  1 UP mgc MGC192.168.0.10@tcp e384bb0e-680b-ce25-7bc9-81655dd1e813 5
  2 UP mdt MDS MDS_uuid 3
  3 UP lov lustre-mdtlov lustre-mdtlov_UUID 4
  4 UP mds lustre-MDT0000 lustre-MDT0000_UUID 5
  5 UP osc lustre-OST0000-osc lustre-mdtlov_UUID 5
  6 UP osc lustre-OST0001-osc lustre-mdtlov_UUID 5
  7 UP osc lustre-OST0002-osc lustre-mdtlov_UUID 5
  8 UP osc lustre-OST0003-osc lustre-mdtlov_UUID 5
  9 UP osc lustre-OST0004-osc lustre-mdtlov_UUID 5
 10 UP osc lustre-OST0005-osc lustre-mdtlov_UUID
Personal tools
Navigation